» ioLogik R2140

« Zurück zur Kategorie

ioLogik R2140

Name: ioLogik R2140
Brand: Moxa
SKU: 9141
Price: 398.77 EUR
Availability: InStock

Referenz -Moxa-ioLogik R2140

Durchschnitt:0 Stellungnahme

332.31€ Exclu. MwSt

Quantität :

Auf Lager

Anfragen angebot an

Garantie 12 Monat

Ergänzen Sie Ihre Bestellung

Zurück zum Anfang

LDP1602

25.69€ Exclu. MwSt

Auf Lager

Beschreibung

Kommentare

.Caractéristiques

8 analog input channels for millivolts ( mV), voltage, and current
signal with wire-off detection (at 4 to 20 mA)
2-channel analog outputs for voltage, current actuator control
16-bit resolution analog inputs, 12-bit resolution analog output
Easy-to-use, quick programming library for VB, VC++, BCB, .NET
NIST-Traceability calibration for analog I/O channels
Firmware upgradable over RS-485

.Eléments Inclus

1 x ioLogik R2140 unit
1 x support CD/DVD

.PDF

Dimensions (unit = mm)

Pin Assignment

I/O (left to right)

• Serial Communication
Interface	RS-485-2w: Data+, Data-, GND (3-contact terminal block)
Serial Line Protection	15 kV ESD for all signals
• Serial Communication Parameters
Parity	None
Data Bits	8
Stop Bits	1
Flow Control	None
Baudrate	9600 to 115200 bps
Protocols	Modbus/RTU
• Inputs and Outputs
Analog Inputs	8 channels
Isolation	3K VDC or 2K Vrms
Analog Outputs	2 channels
• Analog Input
Resolution	16 bits
I/O Mode	Voltage / Current
Input Range	±150 mV, ±500 mV, ±5 V, ±10 V, 0 to 20 mA,4 to 20 mA
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C
Sampling Rate	(for current) All channels: 6 samples/sec • Per channel: 0.75 samples/sec • Only one channel enabled: 0.75 samples/sec
Input Impedance	900 kΩ
Built-in Resistor for Current Input	106 ohms
• Analog Output
Resolution	12 bits
Output Range	0 to 10 V, 4 to 20 mA
Drive Voltage	15 VDC for current output
Accuracy	±0.1% FSR @ 25°C, ±0.3% FSR @ -10 and 60°C
Load Resistor	Less than 250 ohms
• Power Requirements
Power Input	24 VDC nominal, 12 to 48 VDC
Power Consumption	170 mA @ 24 VDC
• Physical Characteristics
Wiring	I/O cable max. 14 AWG
Dimensions	115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in) Note: Please see pages 14-26 for this product’s dimensions diagram.
Weight	200 g
Mounting	DIN rail or wall
• Environmental Limits
Operating Temperature	-10 to 60°C (14 to 140°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	Up to 2000 m
• Standards and Certifications
Safety	UL 508
EMI	EN 61000-3-2; EN 61000-3-3; EN 61000-6-4; FCC Part 15, Subpart B, Class A
EMS	EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61000-6-2
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6
Green Product	RoHS, CRoHS, WEEE
• MTBF (mean time between failures)
Time	280,923 hrs
Standard	Telcordia (Bellcore)
• Warranty
Warranty Period	5 years