If you would like to receive a quote or test our products, please fill out the form below:
Ask for a quote
Answer under 24H

ROBO-8112VG2AR

Reference -ROBO-8112VG2AR
Rating:0 opinion
479.00€ Exclu. VAT

Intel® Xeon® E3-1200v3/Core™ i3 series processor based on PICMG 1.3 SHB with DDR3 SDRAM, VGA, Dual Gigabit Ethernet, Audio and USB

Quantity : 
+
-
On request

Ask for a quote

ROBO-8112VG2AR
Notice
ROBO-8112VG2AR is based on Intel® C226 chipset and workstation processor sku like Xeon® and Core™ i3. Build with flexible PCI express expension, it’s suitable for Medical, Industrial automation, and Digital Signage applications.
 
 
Features
Supports Intel® Xeon® E3-1200v3 series/ Core™ i3 processors in LGA1150 package
Delivers up to 16GB maximum DDR3 1333/1600 ECC SDRAM on two DIMM sockets
Supports triple display by DVI-I (DVID+ VGA) and HDMI
Supports iAMT 9.0 on Intel® Xeon® E3- 1200v3 series processors
High speed dual Gigabit Ethernet based on PCI Express x1, high bandwidth I/O interface
Rich I/O connections such as FDD, two Gigabit Ethernet, serial ports, parallel port, USB 2.0/3.0
On-board five SATA III ports support RAID 0,1,5,10 (dual ports on backplane)
 
Specifications
Processor Intel® Core™ i3 and Xeon® E3-1200v3 series processor up to 3.5 GHz (45~95W) with (8MB) Cache in LGA-1150 package
.DMI x4 Link: 5.0GT/s
.Support Intel® Turbo Boost , Hyper-Threading, Virtualization, Thermal Monitoring, Trusted Execution and SpeedStep Technology (depends on CPU sku)
Chipset Intel® C226 PCH
BIOS Phoenix uEFI BIOS
Memory .Supports up to 16GB DDR3 1333/1600 SDRAM on two 240-pin ECC DIMM sockets
.Supports ECC
Storage Devices .Suppors 5x SATA III drive (Dual ports via Backplane)
.RAID 0,1,5,10
.1x FDD channel
Watchdog Timer Programmable via S/W from 0.5 sec. to 254.5 sec.
Hardware Monitoring System monitor (Voltage, Fan speed and Temperature)
Expansion Interface .From CPU (Xeon/Core i3): 1x PCI Express x16 or 2x PCI Express x8 or 1x PCI Express x8 + 2x PCI Express x4 by jumper setting (Gen3 up to 8.0 GT/s)
.From PCH: 1x PCI Express x4 or 4x PCI Express x1 by different bios support (Gen2 up to 5.0 GT/s)
.4x PCI devices at 32 bit 33 MHz
Super I/O(Embedded Controller) ITE IT8728F
Audio .Intel® BD82C226 PCH built-in High Definition Audio up to 192-kHz 32-bit
.Realtek ALC886-GR HDA codec, 5.1 channels
Ethernet .Intel® WGI217LM + WGI210AT gigabit ethernet controller
.Dual 10BASE-T / 100BASE-TX / 1000BASE-T Ethernet
.PCI Express x1 interface based on gigabit ethernet
.Dual RJ-45 connector with two LED indicators
Serial Port .1x RS232 and 1x selectable RS232/422/485 on board
USB .8x USB 2.0 ports (four ports through backplane)
.480Mb/s bus capable of high-speed/full-speed/low-speed data ranges
.6x USB 3.0 ports on board (four ports on board, dual ports on bracket)
.5Gbps bus capable of high-speed/ full-speed/low-speed data ranges
Keynoard & Mouse .2x USB 3.0 ports on bracket dedicated to keyboard & mouse (on bracket)
.1x 10 pin box header for external PS/2 keyboard/mouse
GPIO On board programmable 8-bit Digital I/Os
Others 1x Parallel port
Graphic Controller .Intel® Xeon® and Core™ i3 processors integrated graphics engine
.Provides improved 3D multimedia capabilities including Microsoft DirectX 11.1, Shader Model 4.0, MPEG-2 and OpenGL 3.2
Display Interface Support independent triple display by
.CRT on bracket: Resolution up to 1920x1200 @ 60Hz
.DVI-D on bracket: up to 1920x1200 @ 60Hz
.HDMI: up to 4096x2160 @ 24Hz (CRT + DVI-D on bracket by DVI-I port)
Dimension .338.5mm(L) x 126.39mm(W), 13.33""(L) x 4.98""(W)
.PCB: 8 layers
Power Supply .Typical: +12V@5.29A;+5V@4.94A
.Support ATX mode
Environment .Operation Temperature: 0°C~60 °C
.Storage Temperature: -20°C~80 °C
.Relative Humidity: 5~90%, non-condensing
MTBF Over 100,000 hours at 40°C
 
Back to top
ROBO-8112VG2AR
Notice

Reviews about this ROBO-8112VG2AR (0 reviews)

pixel_trans
There is no review for this item, add the first one.
pixel_trans
pixel_trans
[Add your review]
Back to top
Chat