If you would like to receive a quote or test our products, please fill out the form below:
Ask for a quote
Answer under 24H


Reference -ROBO-8113VG2AR
Rating:0 opinion
489.00€ Exclu. VAT

Intel® 7th and 6th Xeon® and Core™ i3 processor based on PICMG 1.3 SHB with DDR4 SDRAM, HDMI, DVI-I, Dual Gigabit Ethernet, Audio and USB

Quantity : 

Ask for a quote

ROBO-8113VG2AR is based on Intel® chipset and  7th and 6th desktop processors. Built with flexible PCI express expansions, ROBO-8113VG2AR is suitable for Medical, Industrial automation, and Digital Signage application.
Supports Intel 7th and 6th Skylake-S/ Core i5/i7 processors in LGA 1151 package
Delivers up tp 32GB maximum DDR4 2133 non-ECC DIMM on two sockets
Supports mutiple display by DVI-I(DVID+ VGA)and HDMI
High speed dual Gigabit Ethernet based on PCI express x 1, high bandwidth I/O interface
On-board six SATAIII ports
Rich I/O connections such as four serials ports, USB 3.0/2.0, SATA III ports
Processor .Intel® 7th and 6th Core™ i3/i5/i7 processors up to 3.4 GHz (35~65W) with (8MB) Cache in LGA-1151 package
.DMI x4 Link: 5.0GT/s
.Support Intel® Turbo Boost , Hyper-Threading, Virtualization, Thermal Monitoring,Trusted Execution and SpeedStep Technology (depends on CPU sku)
Chipset Intel® Q170 PCH
Memory .Supports up to 32GB DDR4 2133/1866 SDRAM on two 288-pin DIMM sockets
.Supports non-ECC
Storage Devices .6x SATAIII drives (Dual ports via Backplane)
.RAID 0, 1, 5, 10
Watchdog Timer Programmable via S/W from 0.5 sec. to 254.5 sec
Hardware Monitoring System monitor(Voltage,Fan Speed and Temperature)
Expansion Interface .From CPU (Core i5/i7): 1x PCI Express x16 or 2x PCI Express x8 or 1x PCI Express x8 + 2x PCI Express x4 by jumper setting (Gen3 up to 8.0 GT/s)
.From PCH: 1x PCI Express x4 or 4x PCI Express x1 by different bios support (Gen 3 up to 8.0 GT/s)
Super I/O(Embedded Controller) ITE IT8528E
Audio .Intel® PCH built-in High Definition Audio up to 192-kHz 32-bit
.Realtek ALC886-GR HDA codec, 5.1 channels
.one on.board audio pin header
Ethernet .Intel® WGI219LM + WGI210AT gigabit ethernet controller
.Dual 10BASE-T / 100BASE-TX / 1000BASE-T Ethernet
.PCI Express x1 interface based on gigabit ethernet
.Dual RJ-45 connector with two LED indicators
Serial Port .2x RS232 ports
.2x RS232/422/485 selectable
.LPC to COM port IC: Fintek F81216DG
USB .4x USB 2.0 ports ( through backplane)
.480Mb/s bus capable of high-speed/full-speed/low-speed data ranges
.10x USB 3.0 ports on board (eight ports on board, dual ports on bracket)
.5Gbps bus capable of high-speed/ full-speed/low-speed data ranges
Keynoard & Mouse .2x USB 3.0 ports on bracket dedicated to keyboard & mouse (on bracket)
.1x 10 pin box header for external PS/2 keyboard/mouse
GPIO On board programmable 8-bit Digital I/Os
Graphic Controller .Intel® 7th and 6th Core™ i5/i7 processors integrated graphics engine
.Provides improved 3D multimedia capabilities including Microsoft DirectX 12, OCL 2.x and OpenGL 4.3/4.4
Display Interface .Support independent triple display by
.CRT on bracket: Resolution up to 1920x1200 @ 60Hz
.DVI-D on bracket: up to 1920x1200 @ 60Hz (CRT + DVI-D on bracket by DVI-I port)
.HDMI: up to 4096x2160 @ 24Hz
Dimension .338.5mm(L) x 126.39mm(W), 13.33”(L) x 4.98”” (W)
.PCB: 8 layers
Power Supply .Typical: +12V, +5V
.Support ATX mode
Environment .Operatin Temperature:0°C~60°C
.Storage Temperature:-20°C~80°C
.Relative Humidity:5~90%,non-condensing
MTBF Over 100,000 hours at 40°C
Back to top

Reviews about this ROBO-8113VG2AR (0 reviews)

There is no review for this item, add the first one.
[Add your review]
Back to top