Si desea recibir un presupuesto o probar nuestros productos, complete el siguiente formulario:
Un presupuesto
Responda en 24H

ioLogik R1210

Referencia -Moxa-ioLogik R1210
Categoría:0 de opinión
158.45€ Exclu. IVA
Cantidad : 
Producto en stock
Un presupuesto
Garantía  Garantía 12 mes

Notas y comentarios


  • Supports Modbus/RTU Protocol
  • Dual RS-485 remote IO with built-in repeater
  • Supports the installation of multi-drop communication parameters
  • Install communication parameters and upgrade firmware via USB
  • Upgrade firmware through an RS-485 connection
  • Wide operating temperature (-40 to 85°C) models available


.Eléments Inclus

  • ioLogik R1200
  • Documentation and software CD
  • Quick installation guide (printed)




Easy-to-use software interface for easy maintenance 

Moxa’s easy-to-use ioSearch software, you can quickly access all of an ioLogik R1200 series device’s status information and settings in a user friendly graphic interface. Furthermore, ioSearch also provides an easy method for updating firmware for all ioLogik R1200 devices over an RS-485 network, so you can even update your firmware remotely. This free and easy-to-use ioSearch softwarewill reduce your maintenance time and labor effort. 
Moxa’s ioLogik R1200 lets you set up your communication interface using a simple software utility. When the ioLogik R1200 is on the same RS-485 network, you no longer need to turn hundreds of dials during setup. Instead, simply configure and duplicate each ioLogik R1200’s baudrate and mode through the graphical user interface. This convenient software feature eases the effort of maintenance engineers, and greatly simplifies upgrading traditional device configuration. 


Innovative hardware design reduces deployment effort and enhances maintenance efficiency

With the industry’s first RS-485 serial remote I/O with USB design, Moxa provides an innovative solution for upgrading and configuring RS-485 remote I/O communication devices and firmware. All you need to do is upload the configurations to a USB drive, plug it into the field device, and all the configurations and firmware updates will upload to the field device. This innovative solution allows anyone, even someone with no technical background, to upload a device’s configurations and firmware by USB so you no longer need to bring your computer to the field site to perform routine maintenance.






Cost-saving hardware design for backup and redundancy

Moxa’s ioLogik R1200 provides dual RS-485 ports so when one of your RS-485 ports is damaged, you can quickly switch to the other RS-485 port for quick testing or repair. RS-485 remote I/O devices are already considered a low cost technology, but with dual RS-485 ports, Moxa helps you save a little bit more. 















With the ioLogik R1200, you can take advantage of our dual RS-485 ports to set up wiring, provide computer redundancy, or backup your network using two computer topologies. For wiring redundancy, when your computer detects that one of the RS-485 connections is not responding, it can quickly switch over to the other RS-485 line to guarantee continuous communication between the field sensor and the central computer. Furthermore, users have the freedom to define the settings. For computer redundancy, the ioLogik R1200 provides system operators with a secure backup when one system goes down.


ioLogik R1210 Specifications
• Inputs and Outputs
Digital Inputs16 channels
Isolation3k VDC or 2k Vrms
• Digital Input
Sensor TypeWet Contact (NPN or PNP), Dry Contact
I/O ModeDI or Event Counter
Dry Contact• On: short to GND
• Off: open
Wet Contact (DI to COM)• On: 10 to 30 VDC
• Off: 0 to 3 VDC
Common Type8 points per COM
Counter Frequency2.5 kHz
Digital Filtering Time IntervalSoftware Configurable
• Power Requirements
Input Voltage12 to 48 VDC
Input Current154 mA @ 24 VDC
Common Specifications
• Serial
Interface2 RS-485-2w terminal block ports
Serial Line Protection• ESD Protection: 15 kV
• Surge Protection: 1 kV
• High/Low Resistor for RS-485: 1 kΩ, 150 kΩ
ParityNone, Even, Odd
Data Bits8
Stop Bits1, 2
Baudrate1200 to 921600 bps
ProtocolsModbus RTU (slave)
• Physical Characteristics
WiringI/O cable max. 16 AWG
Dimensions27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
WeightUnder 200 g (0.44 lb)
MountingDIN-rail or wall
• Environmental Limits
Operating TemperatureStandard Models: -10 to 75°C (14 to 167°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)
ShockIEC 60068-2-27
VibrationIEC 60068-2-6

Up to 2000 m

• Standards and Certifications
SafetyUL 508
EMCEN 55022/24
EMICISPR 22, FCC Part 15B Class A
EMSIEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 0.5 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8
Green ProductRoHS, CRoHS, WEEE 
• MTBF (mean time between failures)
Time1,239,293 hrs
StandardTelcordia SR332
• Warranty
Warranty Period5 years (excluding the ioLogik R1214)
Volver al principio
Notas y comentarios

Opinión de internautas ioLogik R1210 (0 Comentarios)

No hay comentario para este articulo, quiere ser el primo a dar su opinión.
[Añadir un comentario]
Volver al principio