Vous souhaitez recevoir un devis ou tester nos produits, merci de remplir le formulaire ci-dessous :
Demander un devis
Réponse sous 24h ouvrées
HYPER-BW-N1-R10
Zoom

Marques

Cartes embarquées

Processeur

Technologies

HYPER-BW-N1-R10

Référence - HYPER-BW-N1-R10
Note moyenne : 0 avis

HYPER-BW-N1-R10
Pico-ITX SBC/N3010/Dual Mini HDMI/USB3.0/GbE

Quantité 
+
-
Sur demande

Demander un devis

Description
Notes et avis

Pico-ITX SBC with Intel® 14nm Pentium®/Celeron® on-board SoC with dual Micro HDMI, M.2, GbE, USB 3.0, SATA 6 HYPER-BW Gb/s, COM, Audio and RoHS


● Pico-ITX SBC supports Intel® 14nm Pentium®/Celeron® on-board SoC
● IEI jumper-less function
● Dual independent display support
● 1333/1600 MHz 1.35V DDR3L SDRAM up to 8 GB supported
● COM, USB 3.0, SATA 6Gb/s and Audio support
● 1 x M.2 B key slot for expansion possibility
● IEI One Key Recovery solution allows you to create rapid OS backup and recovery

 

SoC
Intel® Pentium® N3710 on-board SoC (up to 2.56GHz, quad-core, 2MB cache, TDP=6W)
Intel® Celeron® N3160 on-board SoC (up to 2.24GHz, quad-core, 2MB cache, TDP=6W)
Intel® Celeron® N3060 on-board SoC (up to 2.48GHz, dual-core, 2MB cache, TDP=6W)
Intel® Celeron® N3010 on-board SoC (up to 2.24GHz, dual-core, 2MB cache, TDP=4W)


BIOS
AMI UEFI BIOS


Memory
One 204-pin 1333/1600 MHz single-channel DDR3L SDRAM unbuffered SO-DIMM slot support up to 8 GB


Graphics Engine
Intel® HD Graphics Gen 8 Engine with 16 low-power execution units, supporting DX 11.1, OpenGL 4.2 and OpenCL1.2


Display Output
Dual independent display
2 x Micro HDMI (up to 3840x2160@30Hz)


Ethernet
LAN1: Realtek RTL8111 controller


External I/O Interface
1 x USB 2.01 x USB 3.0


Internal I/O Interface
1 x RS-232 (1x9 pin, P=1.25)
1 x SATA 6G/s with 5V SATA power connector (No RAID) (SATA port0)
2 x USB 2.0 (2x4 pin, P=2.0)


Audio
1 x HD Audio (2x5 pin)


Front Panel
1 x Front panel (1x10 pin, power LED, HDD LED, power buttom, reset buttom)


LAN LED
1 x LAN LED (1x2 pin)


Expansion
1 x M.2 (B Key)


Fan Connector
1 x Smart fan connector (1x4 pin)


Power Supply
12V DC input only
1 x Power terminal block (1x2 pin)Support AT/ATX mode


Power Consumption
12V@1.52A (Intel® Pentium® processor N3710 with 8 GB 1600 MHz DDR3L memory)


Watchdog Timer
Software programmable supports 1~255 sec. system reset


Operating Temperature
-20°C ~ 60°C


Storage Temperature
-30°C ~ 70°C


Operating Humidity
5% ~ 95%, non-condensing


Vibration
3G


Dimensions
100mm x 72mm


Weight
GW:30g / NW:250g

Retour en haut
Description
Notes et avis

Avis des internautes sur HYPER-BW-N1-R10 (0 avis)

pixel_trans
Il n'y a actuellement aucun avis pour cet article, soyez le premier à donner le votre.
pixel_trans
pixel_trans
[Ajouter votre commentaire]
Retour en haut
Discuter