ATX Motherboard supports 14nm 8th Generation LGA1151 Intel® Core™ i7/i5/i3, Celeron® and Pemtium® Processor, DDR4, Triple Independent Display, Dual GbE LAN, M.2, USB 3.0, SATA 6Gb/s, HD Audio and RoHS
● 8th generation LGA1151 Intel® Core™ i7/i5/i3, Celeron® and Pemtium® processor
● Dual-channel DDR4 2666MHz
● Support DVI-I, DP++
● Support M.2 A key for WLAN expansion
● Support Thunderbolt 3 via TB3-40GDP-R10
● IEI One Key Recovery solution allows you to create rapid OS backup and recovery
CPU
8th generation LGA1151 Intel® Core™ i7/i5/i3, Pentium® or Celeron® processor
Chipset
Intel® Q370
BIOS
AMI UEFI BIOS
Memory
Four 288-pin 2666/2400 MHz dual-channel DDR4 SDRAM unbuffered DIMMs supported up to 64GB
Graphics Engine
Intel® HD Graphics Gen 9 engines with 16 low-power execution units, supports DX2015, OpenGL 5.X, OpenCL2.x, ES 2.0
Display Output
Triple independent display
1 x HDMI (up to 4096x2304@60Hz)
1 x DP++ (up to 4096x2304@60Hz)
1 x VGA (up to 1920x1200@60Hz)
1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 4096x2304@60Hz)
Ethernet
LAN1: Intel® I219LM PCIe controller with AMT 11.0 support
LAN2: Intel® I210AT PCIe controller
External I/O Interface
1 x PS/2 KB/MS
2 x USB 2.0
1 x RS-232/422/485
4 x USB 3.0
Internal I/O Interface
1 x KB/MS (1x6 pin)
4 x RS-232 (2x5 pin, P=2.54)
1 x LPT (2x13 pin, P=2.54)
6 x USB 2.0 (2x4 pin, P=2.54)
1 x RS-232/422/485 (2x5 pin, P=2.54)
6 x SATA 6Gb/s with 5V/12V SATA power connector (RAID 0/1/5/10 supported)
TPM
1 x TPM (2x10 pin)
SMBus
1 x SMBus (1x4 pin)
I²C
1 x I²C (1x4 pin)
Audio
Realtek ALC662 HD codec
2 x Audio jack (line-out, mic-in) (colay 3 x Audio jack)
1 x Analog audio (2x5 pin)
Front Panel
1 x Front panel (2x7 pin, power LED, HDD LED, speaker, power button, reset button)
LAN LED
2 x LAN LED (1x2 pin)
Expansion
1 x M.2 A key (2230/3030)
1 x PCIe x11 x M.2 M key (PCIe, USB, SATA)
1 x PCIe x81 x PCIe x16 (share x16 signal with 1 x8 & 1 x4 slots)
2 x PCI2 x PCIe x4 (1 support TB3)
Digital I/O
8-bit digital I/O (2x5 pin)
Fan Connector
1 x CPU fan connector (1x4 pin)
1 x System fan connector (1x4 pin)
Chassis Open
1 x Chassis intrusion (1x2 pin)
Power supply
ATX/AT power supplySupport AT/ATX modeErP/EuP compliant
Watchdog Timer
Software programmable, supports 1~255 sec. system reset
Operating Temperature
-20°C ~ 60°C
Storage Temperature
-30°C ~ 70°C
Operating Humidity
5% ~ 95%, non-condensing
Dimensions
244mm x 305mm
Weight
GW:1200g / NW:700g
CE/FCC
compliant