WAFER-BT-E38451-R20

 WAFER-BT-E38451-R20
3,5" Board E3845 1.91G/QC/iDP/DGbE

3.5” SBC with Intel® 22nm Atom™/Celeron® on-board SoC, VGA/LVDS/iDP, Dual PCIe GbE, USB 3.0, PCIe Mini, SATA 3Gb/s, mSATA, COM, iRIS-1010, Audio and RoHS

● 3.5” SBC supports Intel® 22nm Atom™ 1.5GHz on-board SoC
● Dual independent display support
● 1333/1066 MHz 1.35V DDR3L SDRAM supported up to 8GB
● COM, USB 3.0, SATA 3Gb/s, PCIe Mini, mSATA and Audio support
● IEI One Key Recovery solution allows you to create rapid OS backup and recovery

Specification

CPU
    Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W)
    Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB cache, TDP=8W)
    Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=7W)
    Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB cache, TDP=6W)
    Intel® Atom™ E3815 on-board SoC (1.46GHz, single-core, 512KB cache, TDP=5W)
    Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W)
    Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W)
    Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W)
BIOS
    AMI UEFI BIOS
System Memory
    One 204-pin 1066/1333 MHz single-channel DDR3L SO-DIMM supports up to 8GB (J1900, N2930, E3845, E3827, E3826) or 4GB (N2807, E3825, E3815)
Ethernet
    LAN1: Intel® I210-AT PCIe controller with NCSI support
    LAN2: Intel® I211-AT PCIe controller
I/O Interface
    1 x PS/2 KB/MS
    2 x SATA 3Gb/s with 5V SATA power connector (no RAID)
    1 x USB 3.0 (on rear I/O)
    5 x USB 2.0 (1 on rear I/O, 4 by pin header)
    1 x RS-422/485 (by pin header)
    3 x RS-232 (1 on rear I/O, 2 by pin header)
Digital I/O
    8-bit digital I/O (4-bit input, 4-bit output)
Super I/O
    Fintek F81866
SMBus
    1 x 4-pin (1x4) wafer
Audio
    Realtek ALC662 HD codec
    1 x Analog audio by 10-pin (2x5) header
Display Interfaces
    Dual Independent Display
    1 x VGA (Resolution: 2560x1600@60Hz)
    1 x 24-bit dual-channel LVDS connector (1920x1200@60Hz)
    1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 2560x1600@60Hz)
Expansion
    1 x Full-size PCIe Mini card slot with mSATA support (SATA2 and mSATA share SATA signal)
Watchdog Timer
    Software programmable, supports 1~255 sec. system reset
Power Supply
    12V DC input only (AT/ATX support)
Power Consumption
    +12V@1.45A (Intel® Celeron® J1900 CPU, 1 x 8GB 1333 MHz DDR3 memory)
Graphic
    Intel® HD Graphics Gen 7 Engines with 4 execution unit, supports DX11.1, OpenGL 4.2 and OpenCL1.2
Operating Temperature
    -20°C ~ 60°C
Storage Temperature
    -30°C ~ 70°C
Humidity
    5% ~ 95%, non-condensing
Dimensions
    146mm x 102mm
Weight
    GW:600g / NW:250g
Embedded Controller
    ITE IT8528E
Front Panel
    1 x 6-pin wafer for power LED & HDD LED
    1 x 2-pin wafer for power button
    1 x 2-pin wafer for power reset
Fan Connector
    1 x 4-pin CPU fan connector
    1 x 4-pin system fan connector
iRIS Remote Management Module
    na
LAN LED
    2 x 2-pin (1x2) header